Filter results: Mounts and Pipes

HD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available u...

EHD V-Booms are the strongest mount in their class. They are designed to hold maximum loads in most wind speeds (loading chart available ...

These mounts allow Microwave Dishes to be mounted to the face of a tower. The kits come in a variety of face pipe sizes and lengths and i...

Used to stand off and support single antennas. It mounts to straight or tapered leg towers and works with 1-1/2" to 5" OD round legs and ...

Can be used as a simple stand off or sidearm and is capable of mounting to straight sections 1-1/2" - 5" OD and 2" x 2" to 3-1/2" x 3-1/2...

This pipe mount has an open taper adjustable bracket that allows a safety climb cable to pass through the mount. This mount works with st...

A pipe mount that allows a variety of items to be mounted fairly close to the leg of a tower. Mounts to straight or tapered tower legs, r...

This universal microwave mounting kit allows a microwave antenna to be mounted to a tower leg. Mounts to straight or tapered tower legs, ...

Specifically used for mounting small dish type antennas to Sabre 1200 TLWD, 1800 TLWD, or SRWD. Dish mount and hardware for attachment to...

Specifically used for mounting a single antenna 3' or 6' from the tower leg of a Sabre 1200 TLWD, 1800 TLWD or 1800 SRWD. Sidearm and ha...

Heavy Duty Sidearm, 6, With (1) 4" x 4' 0" Mounting Pipe, Fits Straight Leg From 1-1/2" to 5-9/16" Round Leg and 3' to 5' Tower Face Widths

Allows a place for the microwave strut to tie back to at the proper angle along the face of a tower. This mount works with straight or ta...

Used to attach round members perpendicular to other round members. Each kit includes one (1) plate and four (4) u-bolt assemblies.

Used to attach round members perpendicular to other round members. Each kit includes two (2) clamps and four (4) bolt assemblies

This kit mounts to a leg and provides a greater area for the microwave strut to tie back at the proper angle. This mount works with strai...

Allows a place for a microwave strut to directly tieback to the face mount dish support. Can be adjusted to mount anywhere on tower face ...

These brackets are used to mount a face pipe for strut support. This mount works with straight or tapered tower legs up to 16" OD Round, ...

Can be used to support and protect coax from falling debris between the tower attachment and the back of the microwave dish. All (3) vers...

Two brackets and associated hardware that allow two pipes to be mounted parallel to each other. (Pipe sold separately)

Small brackets can be used as a stand off from a tower leg/pipe or two can be used together to create a simple pipe mount. Fits 1-1/4" to...

These small formed pieces are used to attach strut to a pipe either vertically or horizontally. Includes clamp and u-bolt.

Provides additional support to Sector Mounts and Sidearm Mounts. All hardware for attachment to the tower mount and leg is included.

Used to anchor Tiebacks to tower legs. Hardware for attachment to tower leg is included.

Each kit includes three (3) mounts for attachment to straight or tapered tower legs from 1-1/2" to 5-9/16" OD round legs and 2-1/2" x 2-1...

Microwave Dish Face Strut Support Kit, for Guyed Towers, 3/8" x 3' x 5'-6"

MICROWAVE DISH FACE STAND OFF STRUT SUPPORT KIT, SUPPORT IS 5'-6" LONG, FITS 1-1/2" OD TO 3-1/2" OD ROUND LEGS

Large Leg Adapter Kit, Fits Round Legs from 1-1/2" to 10-3/4 OD and 60 Angel Legs from 2-1/2" to 8"x8"

Tower Face Mount Stand Off Bracket, 14" Stand Off, Fits 2-3/8" to 4-1/2" OD Pipe, Includes Hareware (pipe Sold Separately)

Double Antenna Clamp, with 2' Separation

THE M.O.V.E. (MAXIMIZE OFFSET OF VERTICAL ELEVATION) PLATFORM IS DESIGNED TO ALLOW THE MAXIMUM VERTICAL OFFSET OF YOUR ANTENNAS. THOSE A...

Sabre's best in class V-Boom series are attached to monopoles utilizing tri-collar brackets. V-Booms are designed to hold maximum loads ...

These platforms are designed with two connection levels to include kickers. Used for maximum loads in all wind and ice areas. It has opti...

These platforms are designed with a single connection level. Used for substantial loads in most 90 MPH/low ice load areas. It has options...

SQUARE LOW PROFILE PLATFORM, 12' FACE, FITS 12" - 40" MONOPOLE

Used to mount Platforms, T-Arms or Stand Offs to Monopoles or other round structures. Universal surface mounting allows for a variety of ...

For use with Low Profile Platforms. Handrails can come with or without extra pipes. (Extra pipes can be used for additional structural in...

Universal Reinforcement Kits add vertical stability and increase the allowable loading to Low Profile Platforms. Comes with a collar ring...

Designed to work on wood or steel (straight/round and tapered/multi-sided) poles from 8" to 36" diameter. Mounting face allows ?exibility...

Allows you to stand antennas or other items off of the monopole. These are to be used with collars. (Sold separately)

Designed to accommodate multiple face widths and antenna con?gurations. Each kit includes three (3) T-Arm Assemblies and the appropriate ...

Provides a secure mounting face to eliminate "pipe roll" during installation. Creates a true vertical pipe alignment and offers the flexi...

Allows for up to (6) six pipes to be mounted to a monopole or (with Antenna Separation Kit Attachments) to self-supporting tower legs.

Walkway for use with our SAF T-Arms. Allows the climber an area to stand while working on face-mounted antennas and RRU's. The walkway is...

Round T-Arm, Work Platform Assembly, One Platform Per Assembly, 10' Walkway for T-Arm Face

Monopole Dish Mount, With 4-1/2" OD x 5'3" Antenna Mounting Pipe

T-Arm Pivot, Azimuth Swivel

Used to mount antennas to various mounts (V-Booms, Platforms, Dish Mounts, SAF T-Booms, etc.) Available in various lengths and from 2-3/8...

Antenna Mounting Pipe Kits are available in a variety of lengths to meet all of your antenna mounting needs. Kit includes one (1) Antenna...

This is an angle constructed non-penetrating ballast frame roof mount that aligns multiple antennas in a single sector. Frame is designed...

Designed to provide support and protection for horizontal runs of transmission line. This product supports coax transmission lines on thr...

Sleepers are furnished with 3/4" diameter holes to accommodate Snap-In Hangers (sold separately). They are made of 4" X 4" PVC material a...